Botanical Leaf Tray Mold Making STL Files, Master and Mold Box for Silicone Casting

Botanical leaf tray mold-making STL files with a detailed tray master and matching mold box. Make your own silicone mold for jewelry dishes, trinket trays and decorative casting projects. This high-resolution digital STL set includes the original leaf tray master and its matching mold box. Print both pieces with your 3D printer, pour suitable mold-making silicone, and create a reusable mold for your handmade casting projects. The detailed leaf veins, flowing organic shape and raised edges make this design ideal for decorative trays, jewelry dishes, trinket holders, candle displays and botanical home décor collections.

WHAT YOU WILL RECEIVE

• 1 Original Leaf Tray Master STL
• 1 Matching Mold Box STL
• 2 optimized, high-detail STL files
• Both files are under 20 MB
• Download original_master.stl and mold_box.stl directly from Etsy
• No physical product will be shipped

MODEL DIMENSIONS
Original Master:
• 204.47 × 214.72 × 50.00 mm
• Approximately 8.05 × 8.45 × 1.97 inches Mold Box:
• 240.40 × 230.67 × 57.73 mm
• Approximately 9.46 × 9.08 × 2.27 inches STL files are unitless. Import the models into your slicer using millimeters to obtain the dimensions listed above.

SUITABLE CASTING MATERIALS
Choose casting materials compatible with your silicone, observing the material manufacturers’ instructions. Possible casting materials include:
• Plaster
• Casting plaster
• Epoxy resin
• Casting resin
• Concrete
• Cement
• Jesmonite
• Eco resin
• Similar compatible casting materials

HOW TO USE

1. Download the two STL files.
2. Import them into your preferred slicing software.
3. Choose the appropriate orientation, layer height, infill and supports for your printer.
4. Print the original master and matching mold box.
5. Secure the master inside the mold box.
6. Prepare and pour your preferred mold-making silicone.
7. Allow the silicone to cure according to the manufacturer’s instructions.
8. Remove the finished silicone mold and begin casting.

IDEAL FOR

• Silicone mold makers
• Resin and epoxy artists
• Plaster and concrete casting
• Jesmonite artists
• Handmade home décor businesses
• Jewelry and trinket tray makers
• Small-batch craft production
• Botanical product collections

IMPORTANT

• This is a DIGITAL DOWNLOAD only.
• No physical mold, tray or printed model will be shipped.
• You are purchasing STL files used to 3D print a master and mold box.
• This is not a ready-to-use silicone mold.
• A 3D printer, slicing software and basic mold-making knowledge are required.
• Check the dimensions against your printer’s build volume before purchasing.
• Printer settings and support requirements vary depending on the printer, filament and slicer.
• When resizing, apply the same scale factor to both files and check their clearances. Substantial scaling can affect wall thickness and fine details.
• Dry-fit the master in the box and smooth or seal the printed surfaces as needed before pouring silicone.
• Colors and finished products shown in listing images are presentation examples only.
• Casting materials, silicone and 3D printing supplies are not included.
• Due to the digital nature of this product, returns, exchanges and cancellations are not accepted after download.