Achilles Statue STL Files, Greek Warrior Master and Silicone Mold Making Set

Achilles statue and mold-making STL files: 3D print a Greek warrior figurine or use the matching master, mold box and clips to prepare a silicone mold. This six-file digital set includes both the standalone statue model and mold-making components. The figure features a crested helmet, decorative armor, a round shield, and a flowing cloak.

DIGITAL DOWNLOAD ONLY
This listing includes digital 3D files. No physical statue, printed parts, silicone mold, or casting materials will be shipped.

WHAT’S INCLUDED

• original_master.stl — standalone statue master
• master_base.stl — master model with mold-making base
• mold_box_part_01.stl — first mold box section
• mold_box_part_02.stl — second mold box section
• base_locking_clips.stl — base locking clips
• clamp_locking_clips.stl — clamp locking clips 6 STL files in total.

MODEL SIZE
When imported in millimeters, the standalone master measures approximately 20.18 × 20.75 × 50 mm. STL files do not store measurement units. Check the scale in your slicing software before printing. If resizing the mold-making set, apply the same scale factor to all matching components and check the fit.

INTENDED USE
Print the master and mold box components as part of a silicone mold-making project. Silicone, mold release where required, and casting supplies must be purchased separately.

BEFORE PRINTING

• A 3D printer or printing service and STL-compatible slicing software are required.
• Set the print orientation, supports, and printing parameters for your equipment.
• Check small details and clip tolerances at your chosen scale.
• Mold preparation, sealing, and demolding require appropriate practical experience.

PRINT SETTINGS & FIT
Set layer height, walls, infill, supports, temperature and speed in your slicer for the chosen printer and material. Preview all layers and check the build volume before printing. For a mold assembly, apply the same scale factor to every matching component and test the fit before pouring silicone. Smooth and seal the master as needed for your casting finish; follow the silicone manufacturer’s compatibility and curing instructions.

IMAGE INFORMATION
Colored and stone-effect images illustrate possible finished appearances. STL files contain geometry only; painted colors, textures, and materials are not included. Final results depend on scale, printer resolution, materials, preparation, and finishing.

DOWNLOAD ACCESS
Your Etsy download is Achilles_Download_Instructions.zip. Extract the ZIP and follow its enclosed download link to access the STL files. You need archive-extraction software and an internet connection for the linked download. No physical mold or statue is included.