Sitting Cherub STL Files, Angel Figurine Master and Silicone Mold Making Set

Sitting cherub STL files with an angel figurine master, two-part mold box and locking clips for 3D printing and silicone mold making. Create classical winged ornaments or prepare a master for decorative casting. This sitting cherub STL bundle combines an angel figurine model with mold-making components for makers who want to 3D print a master and prepare their own silicone mold. Featuring a seated pose, hands resting against the cheeks, curly hair and feathered wings, the design brings a gentle, classical character to your next figurine project.

DIGITAL FILES ONLY
You are purchasing 6 STL files. No physical figurine, printed parts or finished silicone mold will be shipped.

DOWNLOAD ACCESS
Your Etsy download is stlfiles.zip, which contains a Google Drive link rather than the STL models themselves. Extract the ZIP, open Google-Drive-Linki.txt and follow the link to download the model archive. Extract the RAR archive with compatible software to access the files.

WHAT’S INCLUDED

• original_master.stl — standalone figurine master
• master_base.stl — master with base
• mold_box_part_01.stl — first mold box section
• mold_box_part_02.stl — second mold box section
• base_locking_clips.stl — base locking clips
• clamp_locking_clips.stl — clamp locking clips

TWO WAYS TO USE THE SET
Print the standalone cherub for a decorative figurine project, or use the master, mold box sections and locking components as part of your silicone mold-making workflow. The set is designed for hobby sculptors, miniature ornament makers and crafters who enjoy preparing their own molds.

BEFORE YOU PRINT
You will need a 3D printer or printing service, slicing software and suitable printing material. Silicone and other mold-making supplies must be purchased separately. Check the imported dimensions and part alignment in your slicer before printing. If resizing the mold assembly, apply the same scale factor to all mating components and check the fit. Print orientation, supports and settings depend on your printer and material. Surface preparation and sealing may be needed before molding; follow your silicone manufacturer’s compatibility and curing instructions.

PRINT SETTINGS & FIT
Set layer height, walls, infill, supports, temperature and speed in your slicer for the chosen printer and material. Preview all layers and check the build volume before printing. For a mold assembly, apply the same scale factor to every matching component and test the fit before pouring silicone. Smooth and seal the master as needed for your casting finish; follow the silicone manufacturer’s compatibility and curing instructions.

ABOUT THE FINISH
STL files contain geometry only. The colors, stone-like appearance and styled setting in the listing image are presentation examples. Your final finish will depend on your printing, casting and painting process. Bring this thoughtful little cherub into your next printing and silicone mold-making project.