Halloween Tray STL Bundle: Ghost Moon & Pumpkin Garden, 3D Print and Mold Making Files

Create your own Halloween tray collection with Pumpkin Garden and Ghost Moon Bath — two decorative tray designs with raised details, supplied as STL files for 3D printing and silicone mold making.

DIGITAL DOWNLOAD ONLY
No physical trays, printed parts, silicone molds, resin or casting supplies will be shipped.

YOUR BUNDLE INCLUDES
• Pumpkin Garden tray STL.
• Ghost Moon Bath tray STL.
• Corresponding mold-making STL files for both designs.

MEET THE DESIGNS
Pumpkin Garden features a pumpkin-shaped outline with sleepy ghosts, curling vines, autumn leaves and celestial details.

Ghost Moon Bath features a softly curved outline with a sleeping crescent moon, little ghosts, stars and flowing wave details.

Both designs combine decorative relief with an open central area for jewelry, keys and small keepsakes.

PRINT, PAINT & CREATE
3D print the trays and finish them in your favorite Halloween colors, or print the mold-making files to prepare silicone molds for your casting projects.

Explore epoxy resin and stone-powder casting finishes using materials compatible with your silicone. Casting supplies and painted finishes are not included.

BEFORE MAKING A SILICONE MOLD
• Remove supports and carefully smooth unwanted print lines.
• Clean and thoroughly dry the printed surfaces.
• Apply a suitable primer or clear sealer compatible with your print material and silicone.
• Allow the coating to fully cure.
• Test a small amount of silicone on an identically prepared surface before pouring the full mold.

Primer alone may not provide a sufficient sealing barrier. Follow your silicone manufacturer’s coating and release-agent recommendations. Resin prints must be properly washed and fully post-cured before coating.

PLEASE NOTE
• File format: STL.
• A 3D printer or printing service and compatible slicing software are required.
• Print orientation, supports and settings depend on your printer, material and scale.
• Check the fit and clearance of corresponding parts before printing.
• Mold release and casting results depend on preparation, geometry and the materials used.
• These are decorative craft designs; food-contact suitability is not established.

ABOUT THE IMAGES
Listing images are AI-assisted digital visualizations showing suggested colors and material finishes. They are not photographs of tested prints or casts. STL files contain geometry, not the painted colors shown.

This collection was developed using AI-assisted design tools.

Add a little moonlit magic to your Halloween crafting.