Book Planter 3D Print Files, STL OBJ 3MF + Silicone Mold Making Files

DIGITAL DOWNLOAD — NO PHYSICAL ITEM WILL BE SHIPPED

Create this decorative Book Planter directly with your 3D printer or use the included mold-making system to create a silicone mold for repeat casting.

This bundle is designed for both 3D printing enthusiasts and mold makers.

You can:

• 3D print the original Book Planter
• Use the mold-making STL files to create a silicone mold
• Produce finished planters from compatible casting materials such as stone-powder composites, casting resin, epoxy, plaster, concrete-based mixes or Jesmonite-type materials
• Scale the original model in your slicer according to your project requirements

WHAT YOU RECEIVE

Original Product Files
STL
OBJ
3MF

Silicone Mold Making Files
original_master.stl
master_base.stl
mold_box_part_01.stl
mold_box_part_02.stl
base_locking_clips.stl
clamp_locking_clips.stl

The mold system includes the master/base components, two mold-box sections and locking components required for the mold-making workflow.

IMPORTANT: Based on the supplied package, the original printable model is available in STL, OBJ and 3MF, while the dedicated mold-making components are supplied as STL files.

TWO WAYS TO USE THIS BUNDLE

1 — DIRECT 3D PRINTING

Open the STL, OBJ or 3MF model in your preferred slicer and print the Book Planter directly using a compatible 3D printer.

Suitable for common slicer workflows such as:

Bambu Studio
Cura
PrusaSlicer
OrcaSlicer
and similar software.

Final print quality will depend on printer settings, filament, layer height, orientation and machine calibration.

2 — SILICONE MOLD MAKING

Print the supplied mold system components.

Assemble the mold-making system and use it to produce a silicone mold.

After the silicone has fully cured, the mold can be used for compatible casting materials such as:

Stone powder composite
Jesmonite-type materials
Casting resin
Epoxy
Plaster
Concrete-based casting mixes

Material compatibility must always be tested before full production.

IMPORTANT FOR SILICONE MOLD MAKING

FDM prints naturally contain layer lines.

For a smoother silicone mold and cleaner cast surface:

Sand the printed master as required.

Clean all sanding dust.

Seal the master with a fully cured coating compatible with your chosen silicone.

Allow the coating to cure completely before silicone casting.

Always perform a small silicone compatibility test first.

This preparation can significantly improve the surface quality of your finished cast pieces.

COMMERCIAL USE

You may use the files to create physical finished products for sale.

You may NOT:

• Resell the digital files
• Redistribute or share the digital files
• Upload the files to another marketplace
• Give the files away
• Sell modified versions of the digital model files
• Sell or redistribute the mold-making files themselves

Commercial sale of physical products made from the files is allowed.

PLEASE NOTE

This is a digital product only.

No planter, silicone mold, plants, filament or physical object will be shipped.

The lifestyle images show examples of what can be created using the digital files.

Colors, surface finishes and plants shown in the images are for presentation purposes only.

Due to differences between printers, slicers, materials and individual production methods, exact results may vary.